Description
Brackets fixed at approximately 1400mm centres to portal frame truss or special beam supplied if fixing points are unavailable. A rail system is fitted between brackets to allow both forward and reverse movement of the winching trolley. Nylon rollers are fitted
to each bracket; 3mm diameter braided polyester rope is threaded from base of curtain through netting over each pulley and back to trolley system.
Rail system supports trolley which raises and lowers the curtain. Trolley system has a special safety jamming device which engages if cable is broken eliminating any danger of injury.
Netting is manufactured from 50mm square x 1.6mm diameter white nylon sports mesh fixed at top to a 21mm diameter pipe with vertical ropes connected to each support bracket to hold the top of the net evenly. The bottom of the sports mesh is attached
to a two metre high section of heavy duty ‘rip stop’ vinyl. The bottom of the vinyl has a 34mm diameter pipe stitched in to hold the net evenly on the floor when the curtain system is in the down position. Supporting beams or fixing points must be very strong to
take the weight of this curtain system.
The total weight of the curtain is approximately 9kg per lineal metre — including tracking system.
Note: Winches must be ordered separately. All vertical lift net curtain systems can also be supplied without vinyl if required.
